Xiamen Keyuan Plastic Co.,Ltd is one of the professional carbon fiber reinforced nylon 66 manufacturers, you can order high quality carbon fiber reinforced nylon 66 at good price from our factory.
PA66-product Specifications
Specifications
Eletrical conductive PA66 Material
1.Good conductive performance.
2.conductive material :carbon fiber, carbon powder, metal powder.
3.the condition of injection molding process also has certain effect on conductive performance.
4.you are required to know the process parameters of conductive PA66, like temperature and pressure, or it will change its conductive performance
Product name |
PA6/PA66 reinforced with (5%-55%)GF / (10%-50%)toughness /(V0,V1,V2)FR/ UV |
Color |
As required |
Advantage |
Competitive price,high quality,on-time delivery,free sample |
Environment friendly | |
High Heat Resistance,High impact resistance | |
Without any impurity | |
Can be reinforced with the glass fiber/toughness/flame retardant/UV stabilizer | |
Packing |
25kg/bag (also can be customized) |
PA66-Product Properties
Item |
Typical Characteristic |
Testing Standard |
|
KY-N6701 |
KY-N6702 |
||
Density |
1.60g/cm3 |
1.55g/cm3 |
ASTM D-792 |
Ggraphite content |
10% |
20% |
--- |
Melt Flow Rate |
6g/10min |
4g/10min |
ASTM D-1238 |
Molding Shrinkage |
0.3-0.4% |
0.5-0.7% |
ASTM D-955 |
Water Absorption |
0.40% |
0.30% |
ASTM D-570 |
Tensile Strength |
60MPa |
75MPa |
ASTM D-638 |
Flexural Strength |
81MPa |
70MPa |
ASTM D-790 |
Flexural Modulus |
4500MPa |
4000MPa |
ASTM D-790 |
Melting Point |
245℃ |
260℃ |
ASTM D-648 |
Heat Deflection Temperature |
185℃ |
220℃ |
ASTM D-648 |
Flame Retardant |
V1 |
V1 |
UL 94 |
Surface Resistivity |
10^11 Ohms/square |
10^10 Ohms/square |
IEC60093(dry) |
Thermal conductivity |
0.6W/mK |
1.2±0.3W/mK |
ASTM D-5470 |
Volume Resistivity |
10^14Ω.cm |
10^12Ω.cm |
IEC60093(dry) |
Dielectric Strength |
50kV/mm |
20kV/mm |
IEC 60243-1 |
CTI |
450V |
580V |
IEC 60112 |
Use temperature | |||
Processing temperature : 250 - 290°C | |||
Mould temperature : 100 - 120°C | |||
Back pressure : ca.10 - 15 bar | |||
Injection speed : medium/high | |||
Pre-drying : necessary |
PA66-Product certification
PA66-Productionflow
PA66 - Our Cooperative Customers
PA66-Tranportways